Direct Coupling Fan
Belt-Driven Fan
Plag Fan
Led Bar
Ladder
Headlight Warning Lamp
Fan Control Panel
Pulse Valve Control Panel
Pulse Valve
Frequency Inverter
Hopper Hammer
Hopper Insulation
Mobile Type Extraction Arm - F-Pro-2
Direct Drive Fan
Pulse Tube
Mobile Type Extraction Arm - F-PRO-3
Mobile Type Extraction Arm - F-PRO-4
Mobile Type Extraction Arm - F-PLUS-3
Mobile Type Extraction Arm - F-PLUS-4
Screw Conveyor
Drall-Regler Damper
AC Motor Fan
Rotary Valve
Dust Bin / Dust Container
Double Flap Valve
ATEX Rotary Valve
Flameless Explosion Vent
Passive Isolation Valve
Explosion Vent
Pilot Box
Automatic Spark Detection & Suppression System
Shield - Inline Spark Arrester
Panel Filter – PolyMIGHT PTFE 65
Hepa Filter
Cartridge Filter(351) - NanoBLEND FR
Cartridge Filter(327G) - NanoBLEND FR
Cartridge Filter(351) - PolyMIGHT ALU
Cartridge Filter(327G) - PolyMIGHT ALU
Cartridge Filter(327G) - PolyMIGHT PTFE 65
Cartrdige Filter(351) - PolyMIGHT PTFE 65
Pleated Bag Filters
Cartridge Filter (D325) - NanoBLEND-FR
Cartridge Filter (380) - NanoBLEND FR
Cartridge Filter (D325) - PolyMIGHT ALU
Cartridge Filter (380) - PolyMIGHT ALU
Cartridge Filter (D325) - PolyMIGHT PTFE 65
Pleated Bag Filter - PolyMIGHT PTFE 65
© 2017 - 2022 Bomaksan Industrial Air Filtration Systems. All Rights Reserved.
The type of fan in which air or gas enters axially and exits radially with the direction of the blades is called RADIAL VENTILATOR.
Direct Coupled Fans have direct drive motors, which means safe and cost-effective operation. Installing an energy efficient fan with our other Bomaksan products saves time and reduces energy costs. It is a centrifugal fan designed for use in all kinds of industrial processes and ventilation systems installed indoors and outdoors. The fan is equipped with vibration absorbers as standard.
Bunker isolation provides a more efficient and long-lasting filtration experience by preventing the polluted air above a certain temperature sucked from various contaminant points from falling below the moisture and acid dew points. Bunker insulation alone may not be sufficient in some cases, in such cases it is recommended to be used with bunker heaters.
Drall-Regulator flaps are used to adjust the fan flow while the fan is running and to turn off the fan flow completely while the fan is running, when necessary. They can be driven by electric actuators or pneumatic actuators. It can be designed as Open / Close or can be adjusted proportionally.
Screw conveyors are an effective way to transport bulk materials at horizontal or low angles. In the operating logic of screw conveyors, a rotating screw pushes the material from point A to point B in a closed enclosure.
Waste dust and particles fall from the hopper to one of the screw conveyor inlets. A motor-driven rotary screw pushes material from one point to another through a sealed enclosure. At the end of the spindle, the material falls into just one container or a rotary airlock, depending on the application.
BOMAKSAN Extraction Arms provides high suction power thanks to its specially designed suction hoods.” Mobile Type Extraction Arms, which are compatible with the use of mobile filters, are heat and spark resistant flexible hose and ergonomically used pneumatic piston externally articulated support system. It plays an effective role in the absorption of fumes.
A specially designed suction hood, manufactured with plastic injection method, provides ease of use and can serve for a long time in the desired position thanks to its lightweight.
BOMAKSAN Extraction Arms provides high suction power thanks to its specially designed suction hoods.” Mobile Type Extraction Arms, which are compatible with the use of mobile filters, are heat and spark resistant flexible hose and ergonomically used pneumatic piston externally articulated support system. It plays an effective role in the absorption of fumes.
A specially designed suction hood, manufactured with plastic injection method, provides ease of use and can serve for a long time in the desired position thanks to its lightweight.
BOMAKSAN Extraction Arms provides high suction power thanks to its specially designed suction hoods.” Mobile Type Extraction Arms, which are compatible with the use of mobile filters, have an effective role in the suction of the fumes formed in your factory with its flexible hose resistant to heat and spark and its internally articulated support system that provides ergonomic use. play.
A specially designed suction hood, manufactured with plastic injection method, provides ease of use and can serve for a long time in the desired position thanks to its lightweight.
BOMAKSAN Extraction Arms provides high suction power thanks to its specially designed suction hoods.” Mobile Type Extraction Arms, which are compatible with the use of mobile filters, have an effective role in the suction of the fumes formed in your factory with its flexible hose resistant to heat and spark and its internally articulated support system that provides ergonomic use. play.
A specially designed suction hood, manufactured with plastic injection method, provides ease of use and can serve for a long time in the desired position thanks to its lightweight.
The fan type in which the air or gas enters axially and exits radially by the direction of the blades is called RADIAL VENTILATOR.
Direct Drive Fans have direct-drive motors, which means safe and cost-effective operation. Installing an energy-efficient fan with our other Bomaksan products saves time and reduces energy costs. It is a centrifugal fan designed for use in all kinds of industrial processes and ventilation systems installed indoors and outdoors. The fan is equipped with vibration absorbers as standard.
BOMAKSAN Extraction Arms provides high suction power thanks to its specially designed suction hoods. The” Mobile Type Extraction Arms “, which are compatible with the use of mobile filters, have an effective role in the suction of the fumes formed in your factory with its flexible hose resistant to heat and spark and its internally articulated support system that provides ergonomic use. play.
A specially designed suction hood manufactured with plastic injection method provides ease of use and can serve for a long time in the desired position thanks to its lightweight.
Frequency Inverters, or VFDs as they are commonly known, are the most efficient way to drive a fan motor. Frequency Inverters allow electric motors to consume less energy by regulating the inrush current. It provides energy savings up to 70% especially in fans and motors that make frequent stop / start.
In addition, the fan flow rate can be increased or decreased by adjusting the frequency of the fan motor. This is an important feature especially in cases where the fan capacity requirement may vary according to usage.
Jet-Pulse automatic compressed air cleaning system uses blower control panels that work according to the pollution rate of the filters. Differential pressure based pulse control panels, which consume much less compressed air than time-adjusted pulse control panels, have many functions in them.
Thanks to its 4-20 mA analog output, it can provide information to your central automation systems if you wish. In this way, you have the chance to monitor your unit remotely without the need for an additional device.
Bomaksan brand fan control panel is the safest and most practical choice to control your Bomaksan brand fan. Star-delta or soft starter panels can be used depending on the motor power and your preference. Conforms to 2006/42 / AT Machinery safety directive, 2014/35 / AB LVD directive.
The type of fan in which air or gas enters axially and exits radially with the direction of the blades is called RADIAL VENTILATOR.
Belt and pulley driven fans drive the rotor by means of a mechanical belt. Thanks to this mechanical belt, the fan speeds can be changed mechanically – within certain limits. This is a particularly useful feature for systems that require fine tuning and do not use an inverter. Installing an energy efficient fan with our other Bomaksan products saves time and reduces energy costs. It is a centrifugal fan designed for use in all kinds of industrial processes and ventilation systems installed indoors and outdoors. The fan is equipped with vibration absorbers as standard.
The unique geometry of the AC Motor rotor improves aerodynamic efficiency, reduces energy losses and reduces noise. Due to its improved efficiency and performance, the impeller complies with the European Union’s stringent Energy Related Products (ErP) Directive to reduce CO2 emissions by developing more efficient products.
Dust bucket are special hoppers where dust filtered in compact units accumulate. Dust accumulating in dust buckets should be emptied into a safe area by maintenance teams at regular intervals, following the required local and national dust disposal codes.
Thanks to the special mechanism in Bomaksan dust buckets, removing the bucket from its slot and inserting it back is effortless.
There are two separate chambers in Double Pendulum Valves. Both chambers have separate sealed flaps. Only one of these sealed valves is always in open position. The flap of the first chamber is opened and the material collected in the bunker is dropped into the first chamber. Then the first chamber flap closes and the second chamber flap opens. When this flap is opened, the waste dust collected in the first chamber goes to the next dust discharge station (BIG-BAG, Screw Conveyor, etc.). Thanks to this operation, the sealing system is provided completely and uninterruptedly. This system cycles continuously to ensure a steady flow of material and to ensure a positive seal in the system.
Hepa filters are highly efficient dust particle traps. All filters that provide filtration efficiency between E10 and U17 according to EN 1822-1: 2009 standard are called Hepa Filters. HEPA filters made of glass fiber are a highly effective filtration tool for particles below 1 micron.
Since HEPA filters are made of glass fiber, they cannot be cleaned in any way (with compressed air or water). HEPA filters are used as disposable filters. For this reason, they are not used as main filters in dust filtration. HEPA filters are generally used in dust filtration after cleanable filters, as an absolute filter or as a police filter. Absolute filter means filter through which we can get breathable air and can be given indoors thanks to its high filter efficiency. Police filter means the filter that prevents dust particles from spreading to the environment in case of any leakage in the main filter. HEPA filters are generally used for these 2 purposes.
The spark detection and fire suppression system is designed to prevent sources of ignition from entering dust explosion hazardous areas such as silos and filters. Extremely fast and sensitive spark detectors detect ignition sources in milliseconds and initiate water extinguishing. The extinguishing normally takes 5 seconds and stops automatically.
1. The response time of spark detectors is only a few milliseconds.
2. The extinguishing unit can extinguish detected ignition sources using only a small amount of water.
3. The signal router controls and monitors the extinguishing event.
4. The control panel monitors the status of the system.
5. The signal router gives output alarms using a siren and a strobe light.
6. Fan controller stops the fans in case of overheating or spark shower.
7. Overheat detection cable monitors the temperature of the engine cooling fins, fan bearings and fan surroundings.
8. Pressure booster controller monitors the water pump and temperature tracing cables.
9. The pressure booster station ensures the correct delivery pressure and avoids air pockets in the firefighting water.
Hermetically sealed pilot housings (protection class IP66) allow remote control of pulse valves.
The valves are pneumatically connected to the casing with 6 or 8 mm Rislan pipe.
The evacuation of industrial dust explosions has been practiced for decades and offers an economical protection solution in facilities where dust explosions can occur.
When determining explosion caps, the effect of the ejected ball of flames (both pressure and flame) and associated risks should be taken into account. Therefore, the explosion evacuation should be directed to a safe area.
Filter installations with pneumatic cleaning systems and high vacuum operations require an explosion cover that can withstand vacuum and periodic positive pressure operation for a long time. Thanks to its domed design, negative pressure resistance is possible without extra vacuum support.
Reliable explosion isolation solutions which mitigate explosion propagation risks to upstream equipment. These passive isolation solutions are effective, self-actuating devices providing inlet explosion isolation to protected vessels handling combustible dusts such as dust collectors, cyclones, and other process equipment.
ATEX certified Rotary Valve (Cell Wheel, Air Locks) is designed and tested for use in ATEX ZONE 22 (or unclassified areas) and ATEX ZONE 20 according to Directive 94/9 / EC and 1999/92 / EC.
Rotary Valve (Cell Wheel, Air Locks) are motorized equipment that automatically and continuously transfer the dust from the bunker to the BIG-BAG dust bags or powder conveyor systems. Bomaksan brand standard cell wheels are made of cast body. Thanks to the specially coated blades, they provide long-term and trouble-free operation.
